12
will allow for multi-channel encoded audio to
reach the soundbar.
• Audio-only sources capable of only stereo output
(such a portable media player docks or CD play-
er) will often connect directly to the soundbar via
the analog input.
NETWORK CONNECTION FOR DTS PLAY-FI
®
To stream audio to your soundbar via DTS Play-Fi,
a LAN (local area network) connection is required.
This connection can be established using Wi-Fi
or Ethernet. Refer to the DTS Play-Fi section of this
manual for setup and usage details.
SUBWOOFER CONNECTION
You may choose to employ a separate subwoofer
to reproduce the .1/LFE channel information in
multi-channel recordings and/or reinforce bass per-
formance of stereo recordings. Any aftermarket home
theater subwoofer can be connected via the sound-
bar’s “LFE Out” RCA connection. We, of course,
recommend using a superb MartinLogan subwoofer.
Additionally, this soundbar integrates a built-in
SWT-2 subwoofer wireless transmitter compatible
with select MartinLogan subwoofers. Subwoofers
utilizing SWT-2 technology will reference this wireless
system on the connection panel.
Please note:
When utilizing a wireless connection,
it is not necessary to use the SWT-2 wireless transmitter
included with the subwoofer.
No Subwoofer
For systems not using a separate subwoofer, use
the soundbar’s menu system and choose “SUB >
NO SUB”. This sets the soundbar to reproduce the
entire frequency range when playing content.
Wired Subwoofer Connection
Using a high-quality RCA style cable designed for
subwoofer connection, connect “Sub Out” from the
soundbar to the “LFE In/Sub In” on the subwoofer.
Use the soundbar’s menu system and choose ‘SUB
> WIRED’.
Reference your subwoofer’s manual to learn how to
properly adjust the sub’s level and phase controls
to achieve proper blending with the soundbar. The
subwoofer’s crossover should be set to “bypass”,
“LFE”. For subwoofers that do not have a “bypass”
or “LFE” crossover setting, we recommend adjusting
the crossover to its highest setting.
Wireless Subwoofer Connection
Press the subwoofer’s sync button and hold for 3
seconds. The subwoofer’s LED will blink quickly.
Use the soundbar’s menu system and choose ‘SUB
> WIRELS > SYNC’. The soundbar will display
‘PSH.BTN’ [PUSH BUTTON].
If pairing has completed successfully, the subwoofer’s
LED will stop blinking and remain on and the sound-
bar will display ‘SYNCED’.
Please note:
If a link
is not established after 30 seconds, the subwoofer’s
LED will start blinking slowly and the soundbar will
display ‘FAILED’. Repeat if syncing fails.
Reference your subwoofer’s manual to learn how to
properly adjust the sub’s level and phase controls.
The subwoofer’s crossover should be set to “bypass”
or “LFE”. For subwoofers that do not have a “bypass”
or “LFE” crossover setting, we recommend adjusting
the crossover to its highest setting.
Please note:
MartinLogan once utilized a
wireless subwoofer connection system named
“SWT-1”. Subwoofers equipped with SWT-1 tech-
