19
T
OP
P
ANEL
C
ONTROLS
Your soundbar features six buttons on top of the
unit to control the following functions:
POWER:
Turns the soundbar on. Press and
hold for 2 seconds to turn the soundbar off (fig. 9).
PREVIOUS/NEXT INPUT:
Cycles through the
inputs. The order of inputs is: Digital Optical > Digital
Coaxial > Left/Right Analog > Play-Fi (fig. 8).
VOL+/VOL–:
Adjusts volume (fig. 8).
MUTE:
When muted, the soundbar will display
‘MUTE’. Pressing this button a second time or
pressing either volume button will restore the previ-
ous volume setting (fig. 8).
Accessing the Menu:
To access the menu,
for 2 seconds press and hold the center button.
After the menu is activated, the buttons will function
as up/down/left/right/enter. Exit the menu by
repeatedly pressing the left directional button (fig.
9 and fig. 10).
Wi-Fi Setup and Status:
For information on
this button, please refer to the Play-Fi section of this
manual (fig. 9).
Fig. 8
Fig. 9
U
PDATES
AND
R
EBOOTING
DTS PLAY-FI
®
APP UPDATE
If the DTS Play-Fi app on your mobile device or
PC requires an update, you will be notified that an
update is available and guided through the update
process.
DTS PLAY-FI MODULE UPDATE
The DTS Play-Fi module within your speaker will
occasionally require an update. If an update is
needed, the DTS Play-Fi app will notify you and
guide you through the update process.
SOUNDBAR FIRMWARE UPDATE
Your soundbar may occasionally require firmware
updates. Please check www.martinlogan.com for
the latest firmware updates.
REBOOTING YOUR SOUNDBAR
On the soundbar’s top control panel, press and
release both the Next and Previous Input (< and >)
buttons. Upon releasing the button, two tones will
play and the soundbar will reboot. This reboot will
cycle the power off and on and force the soundbar
to reconnect to your network.
