background image

16

new soundbar is plugged in, the Wi-Fi Setup 
and Status button will start pulsing slowly. If 
the soundbar is already configured to connect 
to a wi-fi network, the button will turn solid 
(connected) or blink rapidly (not connected).

4.  Once the Wi-Fi Setup and Status button starts 

pulsing slowly, your soundbar is in Access Point 
Mode and ready to connect to your wireless 
network. 

Note:

 If the soundbar’s Wi-Fi Setup 

and Status button is not pulsing slowly, press 
and hold the button for 8 seconds until you have 
heard two tones—one at 3 seconds and another 
at 8 seconds. The soundbar will display “ACCS.
PNT.” After 20 seconds, the Wi-Fi Setup and 
Status button will begin pulsing slowly to indicate 
Access Point mode is ready. At anytime you can 
press the button again to cancel the setup mode.

5.  Launch the DTS Play-Fi

®

 app. 

Android Device Users:

a)  The app will automatically find your device 

and provide prompts for setup.

b)  Touch the “Setup” button on the screen. 
c)  Enter the password for your wireless  network; 

the app will connect your device  to your 
network.

d)  Once your device is connected, you will 

notice that the Wi-Fi Setup and Status button 
on your soundbar will change from blinking 
to solid. This may take up to a minute. If, after 
a minute, the button continues to blink rapidly, 
setup failed and you should try again.

iOS Device Users: 

a)  The app will prompt you to set up a new 

speaker. Click on the screen to view setup 
instructions. If the app does not prompt you 
to set up a new device, within the app, go 
to ‘Settings > Add Play-Fi Device’. Follow 
the on-screen instructions.

b)  You will be prompted to exit the DTS Play-Fi 

app and open your iOS device’s Settings app.

c)  Select Wi-fi in Settings. Ensure that Wi-Fi is 

enabled on your device. Select the Wi-Fi 
network with “Play-Fi ” in the name. 

d)  Once your soundbar is selected as the Wi-Fi 

network, exit iOS Settings and open the DTS 
Play-Fi app. You should now be prompted to 
select your wireless network and enter your 
wireless network password.

e)  Once your device is connected, you will 

notice that the Wi-Fi Setup and Status button 
on your soundbar will change from blinking 
to solid. This may take up to a minute. If, after 
a minute, the button continues to blink rapidly, 
setup failed and you should try again.

PC Users: 

a)  The app will automatically find your device and 

provide prompts for set up. If the app does not 
prompt you to set up a new device, within the 
app go to the settings screen and click ‘Setup 
Play-Fi Device’. Follow the on-screen instructions.

b)  Click the “Set-up” button on the screen. 
c)  Select the speaker(s) you want to set up.
d)  Enter the password for your wireless network; 

the app will connect your device to your 
network. You will notice the Wi-Fi Setup and 
Status button will have changed from blinking 
to solid. This may take up to a minute. If, after 
a minute, the button continues to blink rapidly, 
setup failed and you should try again.

6  Your soundbar is now connected to your wireless 

network. Reconnect your mobile device or PC 
to your wireless network. You may re-name your 
device using the app.

CONNECTING TO A WIRELESS NETWORK: 
WI-FI PROTECTED SETUP (WPS)

Wi-Fi Protected Setup (WPS) is a feature found on 
most wireless routers that allows your soundbar 
product to securely and automatically connect 

Summary of Contents for VISION X








































Reviews: