INSTALLATION AND ADVICE
M
2.6
REV.1-06/07
INSTALLATION AND ADVICE BEFORE USE
GASOLINE ENGINES
+
Use in open space, air swept or vent exhaust gases,
which contain the deathly carbone oxyde, far from
the work area.
DIESEL ENGINES
+
Use in open space, air swept or vent exhaust gases
far from the work area.
POSITION
Place the machine on a level surface at a distance of at
least 1,5 m from buildings or other plants.
Check that the air gets changed completely and the hot
air sent out does not come back inside the set so as to
cause a dangerous increase of the temperature.
+
Make sure that the machine does not move during the
work:
block
it possibly with tools and/or devices made
to this purpose.
Maximum leaning of the machine (in case of dislevel)
10°
10°
= 20° max
10°
10°
= 20° max
26/1
1/99 M2-6GB
1,5
m
1,5
m
1,5
m
GAS
DI
SCARICO
EXHAUST OUTPUT
MOVES OF THE MACHINE
+
At any move check that the engine is
off
, that there are
no connections with cables which impede the moves.
PLACE OF THE MACHINE
ATTENTION
For a safer use from the operator
DO NOT
fit the machine in locations with high risk
of flood.
Please do not use the machine in weather
conditions which are beyond IP protection
shown both in the data plate and on page
named "technical data" in this same manual.
!
