ASSEMBLY
CTL22
M
6.3
REV.2-05/09
Nota
:
Lift the machine and assemble the parts as shown in the drawing
!
TRAILERS
The machines provided for assembling the accessory (slow towing trolley) can be towed up to a
maximum
speed
of
40 Kms/hour
on asphalted surfaces.
Towing on public roads or turnpikes of any type
IS
EXCLUDED
, because
not
in possesion of the requirements by
national and foreign traffic norms.
10/06/00 M6GB
GE 22
TS 415
TS 400 P
GE 33
GE 40
TS 615
To assemble the generating set on the trolley CTL 22 please
keep to following instructions:
1) - Lift the generating set (by means of a suitable hook).
2) - Slightly fix the jaw (3) of the parking foot to the bar
with the screws (4V), the nuts and the washers and
tighten all parts
3) - Open the jaw so as to let the foot sprag (4S) go
through
4) - Introduce into the jaw (3) the upper part (4S) of the
foot and
block momentaneously with the lever (4L)
the whole foot.
6) - Assemble on the machine the towbar (5) complete
of foot with the screws, nuts and washers.
7) - Assemble the axle (7) to the base of the machine
with the screws and relative washers (two per part)
so that their supports coincide.
8) - Insert the wheel (9) on the axle then screw the self
blocking nuts (8).
9) - Pump the tyre (9) fixing the pressure to four atms.
10) - Lower the machine to the ground and place the
parking foot definitively (regulating at the suitable
height).
ATTENTION
Do not substitute the original tires with other types.
7
8
9
3
4S
4L
4V
5
ATTENTION
The CTL accessory cannot be removed from the machine and used separately (actioned manually or following vehicles) for
the transport of loads or anyway for used different from the machine movements.
!