PRECAUTION (ENGINE DRIVEN WELDER)
M
2-5-
1
REV.0-03/00
INSTALLATION AND ADVICE BEFORE USE
The operator of the welder is responsible for the security of the people who work with the welder and for those in
the vicinity.
The security measures must satisfy the rules and regulations for engine driven welders.
The information given below is in addition to the local security norms.
Estimate possible electromagnetic problems in the work area taking into account the following indications.
1. Telephonic wirings and/or of communication, check wirings and so on, in the immediate vicinity.
2. Radio and television receptors and transmettors.
3. Computer and other checking devices.
4. Critical devices for safety and/or for industrial checks.
5. Peapol who, for instance, use pace-maker, hearing-aid for deaf or something and else.
6. Devices used for rating and measuring.
7. The immunity of other devices in the operation area of the welder. Make sure that other used devices are
compatible. If it is the case, provide other additional measures of protection.
8. The daily duration of the welding time.
Make sure that the area is safe before starting any welding operation.
à
Do not touch any bare wires, leads or contacts as they may be live and there is danger of electric shock
which can cause death or serious burns. The electrode and welding cables, etc. are live when the unit
is operating.
à
Do not touch any electrical parts or the electrode while standing in water or with wet hands, feet or clothes.
à
Insulate yourself from the work surface while welding. Use carpets or other insulating materials to avoid
physical contact with the work surface and the floor.
à
Always wear dry, insulating glovers, without holes, and body protection.
à
Do not wind cables around the body.
à
Use ear protections if the noise level is high.
à
Keep flamable material away from the welding area.
à
Do not weld on containers which contain flamable material.
à
Do not weld near refuelling areas.
à
Do not weld on easily flamable surfaces.
à
Do not use the welder to defrost (thaw) pipes.
à
Remove the electrode from the electrode holder, when not welding.
à
Avoid inhaling fumes by providing a ventilation system or, if not possible, use an approved air breather.
à
Do not work in closed areas where there is no fresh air flow.
à
Protect face and eyes (protective mask with suitable dark lens and side screens), ears and body (non-
flamable protective clothers).
30/03/00 M2-5GB
WARNING
!
