ACCESSORY USE
REMOTE CONTROL
TC2 / TC2/50
M
38
REV.1-06/05
The remote control device for regulating the welding
current is connected to the front panel by means of
a multipole connector.
To regulate the current from the TC2 / TC2/50,
move the switch (7), located above the multipole
connector (8), to "ON" position.
Position welding current adjusting (T) knob at the
necessary current value for the diameter and type
of electrode.
ON
OFF
09/1
1/99 M38GB
PUSH AND
SCREW TIGHT
