Mosa TS 300 KS, Use And Maintenance Manual

Page: 10 / 50

The TS 300 engine driven welder ia a unit which ensures the function as:
a) a current source for arc welding
b) a current source for the auxiliary power generation
It is meant for industrial and professional use, powered by an endothermic engine; it is composed of
various main parts such as: engine, alternator, electric and electronic controls, the fairing or a protective structure.
The assembling is made on a steel structure, on which are provided elastic support which must damp the vibrations and also
eliminate sounds which would produce noise.
14/04/14
37304-GB
Technical data TS 300 KS - KSX
M
1.5
REV.0-04/14
Technical data TS 300 KS TS 300 KSX
ALTERNATOR self-excited, self-regulated, brushless
Type Three-phase, asynchronous
Insulating class H
A.C. GENERATORA.
Three-phase generation
10 kVA / 400 V / 14.4 A
Single-phase generation 5 kVA / 230 V / 21.7 A
Single-phase generation 2.5 kVA / 110 V / 22.7 4
Single-phase generation 5 kVA / 48 V / 104 A
Frequency 50 Hz
ENGINE
Mark / Model KOHLER KD 477/2
Type / Cooling system Diesel 4-Stroke / Air
Cylinders / Displacement 2 / 954 cm
3
Net output 14.9 kW (20.3 HP)
Speed 3000 rpm
Fuel consumption (welder 60%) 2.5 l/h
Engine oil capacity 3 l
Starter Electric
GENERAL SPECIFICATIONS
Battery 12V - 45Ah
Tank capacity 23 l
Running time (welder 60%) 9.2 h
Protection IP 23
Dimensions / max. (Lxlxh in mm) 1320x790x750
Dimensions with CTM 1630x920x930
Dimensions with CTL 2050x980x990
Weight 350 Kg 370 Kg
Weight with CTM 370 Kg 390 Kg
Weight with CTL 410 Kg 440 Kg
Acoustic power LwA (pression LpA) 99 dB(A) (74 dB(A) @ 7m) -
Measured acoustic power LwA (pression LpA) - 96 dB(A)(71 dB(A) @ 7m)
Guaranteed acoustic power LwA (pression LpA) - 97 dB(A)(72 dB(A) @ 7m)
POWER
Declared power according to ISO 3046-1 (temperature 25°C, 30% relative hummidity, altitude 100 m above sea level).
It’s admitted overload of 10% each hour every 12 h.
In an
approximative way one reduces: of 1% every 100 m altitude and of 2.5% for every 5°C above 25°C.
ACOUSTIC POWER LEVEL
ATTENTION: The concrete risk due to the machine depends on the conditions in which it is used. Therefore, it is up to the end-
user and under his direct responsibility to make a correct evaluation of the same risk and to adopt specific precautions (for
instance, adopting a I.P.D. -Individual Protection Device)
Acoustic Noise Level
(L
WA
)
- Measure Unit dB(A): it stands for acoustic noise released in a certain delay of time. This is not
submitted to the distance of measurement.
Acoustic Pressure (Lp) - Measure Unit dB(A): it measures the pressure originated by sound waves emission. Its value changes
in proportion to the distance of measurement.
The here below table shows examples of acoustic pressure (Lp) at different distances from a machine with Acoustic Noise Level
( L
WA
)
of 95 dB(A)
Lp a 1 meter = 95 dB(A) - 8 dB(A) = 87 dB(A) Lp a 7 meters = 95 dB(A) - 25 dB(A) = 70 dB(A)
Lp a 4 meters = 95 dB(A) - 20 dB(A) = 75 dB(A) Lp a 10 meters = 95 dB(A) - 28 dB(A) = 67 dB(A)
PLEASE NOTE: the symbol when with acoustic noise values, indicates that the device respects noise emission limits
according to 2000/14/CE directive.
2000 / 14 / CE
2000 / 14 / CE