8
571823 - MX26HB Line Trimmer Owner’s Manual - April ‘14
STORAGE
Do not store your unit for a prolonged period of time ( 30 days or
longer ) without performing protective storage maintenance which
includes the following :
1. Store unit in a dry dust free place, out of the reach of children.
WARNING/DANGER
Do not store in enclosure where fuel fumes may accumulate
or reach an open flame or spark or serious personal injury
may result
2. Place the stop switch in the “OFF” position.
3. Remove accumulation of grease, oil, dirt and debris from
exterior of units.
STORAGE FOR ENGINE
1. Drain the fuel tank completely and pull the recoil starter handle
several times to remove fuel from the carburettor.
2. Remove the spark plug and pour 7cc (1/4 oz) of fresh, clean,
two–stroke engine oil into the cylinder through the spark plug
hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2-3 times to distribute
the oil inside the engine.
C. Observe the piston location through the spark plug
hole. Pull the recoil starter handle slowly until the
D. piston reaches the top of its travel and leave it there.
3. Install the spark plug (do not connect spark plug cable).
Model
MX-26HB
Engine
Brand & model
Honda
GX25
4 Stroke
Displacement
24.5cc
Max output (Kw)
0.81
Fuel tank capacity
0.5
Carburettor Type
Diaphragm
Start System
Recoil Starter
Clutch System
Automatic centrifugal
Drive System
Transmission and Tube
Wire Steel / Aluminum Ø 24mm x Elbow type
Handle type
D-Loop
Throttle Lever
Trigger type with stop switch
Cutting
Attachment
Gear case
Ø 24: 7 x 7T
Blade
Nylon line
Packing
Weight
4.6kg
L x H x W
1050mm x 220mm x 240mm
Specifications
