5
571823 - MX26HB Line Trimmer Owner’s Manual - April ‘14
Safety precautions
1. Before beginning work, check the worksite carefully to see
whether there are any obstacles to be removed or avoided and
whether there are any potholes or obstructions which might
cause you to lose your footing.
2. The area within a radius of 15m of the line trimmer should be
considered a hazardous area into which no one should enter
while the line trimmer is in use. If necessary, yellow warning
rope or warning signs should be placed around the work area.
When work is to be performed simultaneously by two or more
persons, constantly be aware of the location of other operators
to maintain a safe separation distance.
3. Make sure that there are no loose screws or bolts, fuel leaks
or any other problems, which might result in unsafe operation.
Be especially careful to check the cutting devices and their
fastening arrangements.
WARNING
Never use other cutting devices than those provided
Before Starting the engine
1. Take a careful look around to make sure that there are no
obstacles within a radius of 15m around the line trimmer.
2. Place the body of the line trimmer onto the ground in a flat
clear area and hold it firmly in place to ensure that the blades
will not contact anything when the engine starts.
3. Place the trigger grip in the START position when starting the
engine. Do not start the engine at full speed. (See STARTING
THE ENGINE, page 8.)
4. After starting the engine, if the blades continue to rotate when
the trigger grip has been released to the idle position, turn off
the engine and check that the trigger grip cable is functioning
correctly.
KICKBACK SAFETY PRECAUTIONS
A dangerous reaction may occur if the spinning blade
contacts a solid object. It is called kick back. As a
result, the operator can lose control of the unit, resulting
in a serious accident.
To avoid kick back, observe the following safety precautions:
1. Before beginning work, check your working area and remove
any obstacles.
2. Grip your line trimmer only by the handles.
3. When using your line trimmer, always look closely at where you
are cutting. If you need to look away, set the engine to idling
speed.
4. When the engine is running, always keep the cutter head well
away from your feet, and never lift it above waist level.
OPERATING SAFETY PRECAUTIONS
1. Grip the line trimmer firmly with both hands, using the correct\
hand positions. When not cutting, set the engine speed to
idling.
2. Always be sure to maintain a safe footing while working.
3. Run the engine no faster than the speed required to cut cleanly.
4. If grass gets caught in the blade during operation, or if you
need to check the unit or refuel the tank, always be sure to turn
off the engine.
5. If the blade touches a hard object like a stone,
immediately stop the engine and check the blade. If
necessary, replace the blade by new one.
6. If someone calls out while you are working, always be
sure to turn off the engine before turning around.
7. Never touch the spark plug or plug cord while the
engine is running. Doing so may result in receiving an
electrical shock.
8. Never touch the muffler, spark plug, or other metallic parts
of the engine while the engine is running or immediately after
shutting down the engine as serious burns may result.
9. Stop the engine when moving from one work location to
another.
SAFETY MAINTENANCE
1. Perform the regular maintenance procedures described in
this manual. Repair and maintenance procedures other than
those detailed in this manual should be carried out only by an
authorised service dealer.
2. Under no circumstances should you take apart the line trimmer
or alter it in any way. Doing so can result in damage to the
machine, and may negate the manufacturer warranty.
3. Always be sure to turn off the engine before performing any
maintenance or checking procedures.
4. To prevent injury when sharpening, removing, or reattaching the
blade, be sure to wear thick, sturdy gloves and use only proper
tools and equipment.
5. When replacing the blade or any other parts, always be sure to
use only genuine MORRISON spares.
Notes on transportation
1. If a metal cutting blade is fitted, wrap it with a cloth to
cover the sharp cutting edges.
2. When transporting by car, fix the unit firmly using a rope. It is
dangerous to transport the line trimmer by cycle or motorcycle.
3. When travelling distances or over rough roads, fuel may spill
from the tank. To avoid this, empty the tank before the journey.
