Morita DENTA PORT ZX, Operation Instructions Manual, Page: 10 / 36

Operation 2018-03-22
Page6
4. Before Using the Unit
Connecting the Probe Cord
1. Insert the probe cord completely into the jack on the left side
of the Canal Measurement Module.

Handle the Canal Measurement Module carefully; do not
drop, bump or expose the equipment to other kinds of
impacts or shocks. Rough handling could cause damage.

Make sure the plug is securely plugged into the jack. A poor
connection can prevent measurement.

Do not drop anything on or bang the plug after it has been
inserted into the jack.
2. Insert the file holder’s gray male plug into the gray female
connector on the probe cord. Insert the contrary electrode
into the white female connector on the probe cord.

Make sure to match colors of the file holder and contrary
electrode to the probe cord.
Measurements cannot be made if these connections are
reversed.
Checking the Function
This checking procedure should be followed at the beginning of
every day.
1. Press the Power switch to turn the unit on. The
measurement display will appear.
* The instrument turns itself off if it is not used for five
minutes.
2.
Check that the probe cord is properly plugged into the jack.
3. Check that the file holder and contrary electrode are properly
connected to the probe cord.
4. Contact metal part of the file holder with contrary electrode.
Probe Cord Plug
Probe Cord Connector
Contrary Electrode
Probe Cord Connector
(gray)
File holder Plug
(gray)
Plug in
(white)
Plug in
Contrary
Electrode
File Holder Contact
Power Switch