Page 28
FOLDING
Setting the Delivery Conveyor System.
WARNINGS:-
1. The Machine will
start if the delivery unit is not in its up position.
2. If the delivery is turned off the roller will feed to the far end of the belt conveyor and park
there until turned on again.
3. If the delivery is turned on when using the ‘Set by Fold’ mode of operation; the Roller
Position and Shingle Length are automatically set, relative to the paper length and type of
fold selected.
4. When using the ‘Set by Position’ mode of operation; the Roller Position and Shingle
Length must be adjusted manually to suit the job. (See FIG 17.1 below).
5. When the optimum settings for the roller position and shingle length are achieved they
can be stored with the job.
not
NOTE.
When setting the machine to do a Double Fold or Engineering Fold, with a paper length of
279mm (11”) or less, the stacker roller will travel to the far end of the conveyor and stop.
This is due to the shortness of the folded paper exiting from the machine.
FIG 17.1
Operating the DigiFold Pro