Page 52
Trouble Shooting
Error Screens (Continued)
Flying Home Failure
(Back Sensor)
(Back Sensor)
(Top Sensor)
If the machine stops and error message 08 is displayed on the touch screen, this
indicates that the home signal was missed during creasing. Check that the blade
pressure is not too high.
If the machine stops and error message 09 is displayed on the touch screen, this
indicates that the sensor is or was blocked when it should have been clear.
i.e. A jam in the paper path or the wrong length of paper has passed through the
sensor.
To correct - check if paper is present and check that the paper path is clear before
restarting. See page 39 that describes how to remove paper jams.
If the machine stops and error message 10 is displayed on the touch screen, this
indicates that the sensor did not see the paper at the correct time.
i.e. A jam in the paper path.
To correct - Check if paper has jammed in the machine prior to the sensor.
See page 39 that describes how to remove paper jams.
If the machine stops and error message 11 is displayed on the touch screen, this
indicates that the sensor is or was blocked when it should have been clear.
i.e. A jam in the paper path or the wrong length of paper has passed through the
sensor.
To correct - check if paper is present and check that the paper path is clear before
restarting. See page 39 that describes how to remove paper jams.
Clip 1 NOT clear
Clip 1 NOT Blocked
Clip 2 NOT clear
FOLDING
