Crease trim - On selection
the status area is
replaced with a calculator
for inputting new values.
Crease on/off selector
green is on & red is off.
This is also indicated in
the status area.
Greyed out area indicates
the trim is not selectable
Creases may be trimmed
by 0.1mm increments
within the range of
5.0mm to +5.0mm.
Status shows creasing off
icon
This button toggles
creasing on & off.
Page 20
FOLDING
Crease Settings Pages.
To get to the crease setting page click the lower tab
or
from the
status area.
If you have selected a predefined standard Fold Type from the paper settings page
the crease positions will be set for you. These positions can be fine tuned by
Trimming creases in ‘Set By Fold’ mode.
Turn creasing off.
Creases in ‘Set By Fold’ mode.
± 0.1mm
increments by pressing the arrow buttons
for each crease.
Operating the DigiFold Pro
