Morgana BM 2000, Operator'S Manual

Page: 5 / 59

4
WARNING :
To avoid hazardous situations like for instance electric shock or danger while exposed
to moving, rotating or cutting devices, do not remove any covers, guards or screws
other than those specified in this manual.
Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if
any of the following conditions exists:
You drop objects or spill something into the equipment.
You suspect that your equipment needs service or repair.
Your equipment’s covers has been damaged.
You notice unusual noises or odours when operating the equipment.
If the power cable or plug becomes worn out or otherwise damaged.
Before cleaning and care (unless otherwise specifically instructed).
Electromagnetic compliance:
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
The product (System) which is connected to this machine will be class A.
•
•
•
•
•
•
•
•
•
•
•
Safety Information
When using this machine, following safety precautions should always be followed.
Safety during operation
General safety
WARNING :
Always connect the equipment to a properly grounded power source (wall outlet). If in
doubt, have the power source checked by a qualified electrician.
Improper grounding of the equipment can result in electrical shock. Never connect the
machine to a power source that lacks a ground connection terminal. This machine is
destined for specific purpose only. Any use going beyond this specific purpose is re-
garded as beyond the determination. The manufacturer will not be liable for damages
resulting from any use beyond the determination, unallowed operation, respectively.
The user alone bears the risk.
Do not make arbitrary changes or modifications to the machine. The manufacturer will
not be liable for modifications made at the machine on your own and damages result-
ing thereof. EC declaration of conformity and the mark CE will be invalidated, if you
make changes at the machine or at the individual components.
Do not override or bypass electrical or mechanical interlock devices.
The machine is to be used only by authorized and instructed persons. The responsibil-
ities on operating the machine have to be strictly laid down and observed so that there
are no unclear competences regarding safety aspects.
Vent holes serve for air circulation to protect the machine from overheating. Make sure
that the holes are not covered.
Do not expose fingers or other parts of the body to moving, rotating or cutting devices
such as for instance between upper and lower trimmer knives.
Allways locate the equipment on a solid support surface with adequate strength tor
the weight of the machine.
•
•
•
•
•
•
•
•