manualshive.com logo in svg

Morgana BM 2000, Operator'S Manual

The Morgana BM 2000 Operator's Manual is a comprehensive guide that enables users to efficiently operate and maintain their Morgana BM 2000 machine. It provides step-by-step instructions, troubleshooting tips, and diagrams, ensuring a smooth and error-free operation. Download this essential manual for free from our website, ensuring maximum productivity.

Share
Download
background image

7. General Remarks

Cleaning feed Belts

Squarefolder

The feed belts need to be cleaned regularly when in use, and if the unit has not been used for 

a period of time. How often this should be done, depends on the paper type and print quality.

An increasing number of jams is one indication of the need to clean the feed belts. Clean 

the feed belts with water and a lint free cloth.

Open the top cover.

Clean the upper feed belts (A). The upper feed belts can easily be rotated in either 

direction. 

Lift up the upper feed belts to access the lower feed belts.

Clean the lower feed belts (B). Rotate the lower feed belts towards the outfeed side for 

complete cleaning.

Place the upper feed belts in normal position.

Close the top cover.

Upper feed belts raised

B

A

Upper feed belts in normal position

Summary of Contents for BM 2000




























































Reviews:

No comments

Related manuals for BM 2000

Brands by name

Popular brands

Load more brands