17
Summer
-
Winter
It allows you to set the system in Summer mode (domestic hot water
only, no heating) or Winter mode (domestic hot water and heating). It is
necessary to change the setting only if hydraulic configurations 2 or 3
are used (see
HYDRAULIC SYSTEM MANAGEMENT
).
•
Enter the menu by pressing P3, select Summer
-
Winter in the menu
by pressing P4 and P6, then enter by pressing P3. Press P3 to enter
edit mode, select the desired mode using the keys P4 and P6 then
save the setting by pressing P3 again. Press P1 to exit the menu.
In Summer mode, the following symbol
appears on the display
Cleaning
This menu activates (ON) or deactivates (OFF) the auto-
matic burn pot cleaning system. This process takes place
at the beginning of the ignition phase.
Note: It is recommended to always keep it active
Summer
-
Winter
Summer
Winter
Cleaning
ON
OFF
Secondary Information
This item allows you to read the secondary information related to the
system
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Remote Control
Menu that allows you to enable or disable the Remote Control (not com-
patible with the boiler model).
Service
This item allows you to enter the following submenu
ORDER
MENU
1
Counters
2
Error list
3
Secondary Information
4
Auger Calibration
5
Fan Calibration
6
Automatic Power
7
FCS
8
Cleaning
9
Manual Load
Counters
Menu that displays: Hours in Normal Condition, Number of Ignitions,
Number of Failed Ignitions.
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Error list
This item allows you to read the system error list
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Auger Calibration
This item allows you to adjust auger rotation speed
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Fan Calibration
This item allows you to adjust exhaust fan rotation speed
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Automatic power
This item allows you to switch on and to switch off automatic combustion
power
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
FCS
This item allows you to adjust the combustion parameters
Attention
: to be used only by an authorized
MORETTI DESIGN
techni-
cian
Manual Load
This item allows for the manual filling of the Screw Feeder.
Note: This control works only with the boiler off and not blocked.
•
Enter the user menu by pressing P3, select Load using the keys P4
and P6, then enter by pressing P3. Press P3 to enter edit mode,
select the desired mode using the keys P4 and P6 then save the
setting by pressing P3 again. Press P1 to exit the menu.
Note: Once the loading procedure is complete, empty the burn pot
before the ignition phase.
Load
OFF
ON
Display
This menu allows you to adjust the contrast, minimum brightness, to
switch on and to switch off the screen saver and the acoustic alarm
•
Enter the menu by pressing P3, select display menu using the keys
P4 and P6, then enter by pressing P3. Press P3 to enter edit mode,
select the desired mode using the keys P4 and P6 then save the
setting by pressing P3 again. Press P1 to exit the menu.
System Menu
Menu to access the Secret Menu reserved for the authorised
MORETTI
DESIGN
Technician.
Access to the page is PASSWORD protected.
PASSWORD?
----
EN
