11
-
Time and Date
-
Summer
-
Winter
Menu that allows you to select the Summer
-
Winter operating mode (if
enabled).
-
Counters
Menu that displays: Number of Ignitions, Number of Failed Ignitions, Hours
in Normal Condition.
-
Reset Cleaning
To reset the Scheduled Routine Maintenance counter.
-
Screw Feeder Calibration
if A24=0, the operation of the Combustion Fan can be adjusted as a per-
centage. There are 14 steps, 7 to increase and 7 to decrease; 0 corre-
sponds to the default setting.
-
Fan Calibration
if A24=0, the operation of the Combustion Fan can be adjusted as a per-
centage. There are 14 steps, 7 to increase and 7 to decrease; 0 corre-
sponds to the default setting.
-
FCS
If A24>0, the Flowmeter can be adjusted as a percentage. There are 14
steps, 7 to increase and 7 to decrease; 0 corresponds to the default set-
ting.
-
Cleaning
This menu allows you to activate or deactivate the automatic burn pot
cleaning system; this process takes place during the ignition phase. It is
recommended to keep it activated.
-
Mixing Valve
It appears only if an output is configured as a Mixing Valve; this menu
allows for the valve to be adjusted Automatically or Manually by forcing it
to open or close.
-
Load
The menu allows for the manual filling of the Screw Feeder.
The boiler
must be
OFF
for this function to be performed.
If the Screw Feeder is
manually activated, then the Smoke Fan is also activated, this is necessary
so that the Pressure Switch can close the contact and the Screw Feeder
can turn.
Settings
-
Language
Service
Customizations Menu
Customization
Settings
Service
System Menu
Display Menu
Settings
Time and date
Language
Remote Control
Summer
-
Winter
Winter
Time and Date
11:45 Fri 18 Oct 2019
Oct
Language
Settings
Time and date
Language
Remote Control
Summer
-
Winter
Winter
Summer
-
Winter
Summer
Winter
Counters
Auger Calibration
Fan Calibration
Automatic Power
FCS
Cleaning
Manual Load
Reset Cleaning
EN
