www.miinet.com
Moore Industries-International, Inc.
- 53 -
User’s Manual
225-748-01L
February 2017
Input Scaling
Figure 5.2.
Input Scaling Tab
Input Scaling–
This allows you to customize your display for your application. By example: if
your process is sending a 4-20mA signal to the STA and you wish to view the input as 0-100%
then this can be accomplished with the Scaling feature.
To scale your instrument, perform the following steps:
1. Click the “Enabled” check box.
2. The “Sensor Range” boxes will display the range selected in the “Input Type” section of
the
Input
screen.
3. In the “Process Variable” text boxes, enter the values you wish displayed when your input
is at its Lower Range and Upper Range.
Once downloaded, your unit will display the scaled values on its LCD.
Custom EGU–
If select you can choose to assign a specific label, or EGU (Engineering Unit).
1. Check the “Custom” box.
2. Enter the value you wish viewed into the “Custom EGU” text box.
Alpha numerical characters allowed:
A-Z, 0-9, *, + , - , / , \ , >, <,
Note:
Custom EGU will prompt a warning if any character entered in this field is invalid and will
then set invalid that character(s) to “X”.
Note:
Once you have configured all parameters, download to the unit by selecting “Download” in
the Transfer dropdown menu located in the Status Bar. Or, click the button in the Menu Bar.
Programmable Current/Voltage Safety Trip Alarm
STA
HLPRG
SEC
TION 5
