www.miinet.com
Moore Industries-International, Inc.
- 42 -
User’s Manual
225-748-01L
February 2017
Programmable Current/Voltage Safety Trip Alarm
STA
HLPRG
SEC
TION 4
Password Configuration
Figure 4.12 gives an overview of the Password Configuration menu.
The “CONFG PASWD” menu, is for setting a new password.
1. At “CONFG PASWD”, press
SELECT
. This puts you in the “PASS” menu. The previously
saved password appears.
2. Use the
UP
and
DOWN
buttons to set a new password to any number between 0 and
9999. Press
SELECT
.
3. The “EXIT PASWD” appears. Press
SELECT
, to exit, “RESET FAULT” menu will appear.
Note:
If the security is set to Full Access a password can be set but will not be requested to use
and configure STA unit. Please refer to Security Settings in Section 3.
D
D
D
U
U
U
CONFG
PASWD
CONFG
PASWD
EXIT
PASWD
Value Change:
XXXX
PASS
SEL
SEL
SEL
RESET FAULT menu
Figure 4.12.
CONFG PASWD Menu
