14
15
www.DeubaXXL.de
www.DeubaXXL.de
14
15
www.deubaxxl.de
www.deubaxxl.de
W1 Bearer bracket
W2 Upper foot end
W3 Hook
W4 Pulley
W5 Counterweight
W6 Plug
W7 Casing
W8 Motor
W11 Pulley Mount (Not included in delivery
scope)
W12 Lower End Rail
Wire Cable
Included in Supply
W15 2 Piece Bearer Frame
W16 Winding Unit - 1 Part
W17 Flat Base in 4 Pieces
W18 Spring Washers - 4 Items
1.
a brake and provides reliable security.
2. Gearbox: This uses a two-stage speed reducing
high quality steel and are hardened by heat
treatment. The engine and gearbox are an
integrated unit. The housing is produced by an
and appealing.
3. The cable drum and frame: The cable drum is
formed and embossed with high quality steel
and shaped and welded with a steel pipe.
formed by punching and welding with high-
quality steel plate. It is designed to protect and
secure the electric hoist.
4. Hook: The hook is forged from high-quality
carbon steel. Using the pulley hook doubles
5.
switch to move the hook up and down. There
machine in case of emergency.
6. The device has an upper and lower stop
mechanism 1). When the weight is raised and
touches the limit switch-stop ring, for security
reasons the limit switch will interrupt the
circuit. 2) When the weight is lowered and the
steel cable is used up, the steel rope will press
the end bar and press the brake disc.
This means that, for safety reasons, the switch
will stop the machine to guarantee safety.
•
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
•
Use the power tool, accessories and tool bits
and the work to be performed.
from those intended could result in a hazardous
Service
•
parts.
This will ensure that the safety of the
power tool is maintained.
Important note:
1.
make sure that the voltage reaches 230V± 5%.
2. The appliance operates using a voltage of
230V±5%. If the voltage does not meet these
power.
3.
specialist.
I. Intended Use
designed to be used for low volume, lightweight
motor uses 230V±5%/50Hz±1% single-phase
12
1
2
5 13 4
3 6 7 8
9
14 10
11