17
The seat adjustment is very personal
. To regulate the height, the seat post
quick release must be open, later, the
right height must be selected and
close the quick release properly. The
seat post height must be proportional
to the rider’s height
See section: “ How to adjust the quick
release"
Never extend the seat post
beyond the indicated line on the
tube, as shown in point 1. See
(Figure 6).
Figura 6
2. Seat inclination. This adjustment is the most delicate and personal towards the user.
Generally, it is horizontal or with the tip slanted slightly downwards. Try different
positions until finding the most comfortable.
This adjustment is made by loosing the screw (1) (allen 6 mm) underneath the seat,
set the required inclination thigh the screw. The recommended torque value is (20-25
Newton). See (Figure 7).
3. Seat rear position: This seat adjustment implies moving the seat forwards or
backwards with respect to the seat post. Generally, the seat is centred to the stem
Placing the seat further back generally implies having to bend forward more to reach the
handlebar and excessive strain on the quadriceps muscle group.
To adjust this position, open the same bolt (1) (allen 6 mm) used to get the right
inclination (Figure7).
It is recommended to set at
the same time: The
inclination and the rear
position.
Figure
