13
• Correct position of the front and rear brakes: levers, V-brake, disc and cables.
• Correct tight of the wheels nuts.
• Correct pressure of the tires.
• Correct wheels alignment.
• Correct pedals fitting ( they shall be fitted strongly ).
• Correct tight of the quick-release clamps
The E-48 does not need any initial lubrication and it is prepared to travel the first km
without any type of maintenance. Afterwards , the standard one
The E-48 and its components must be checked before using the vehicle. Remember
that in the case that a problem is detected that you can not fix, please contact with the
authorized distributor
Make as normal the following checking before riding the E-48.
Verifications before riding the E-48:
•
WHEELS
•
HANDLEBAR AND STEM
•
HEADSET AND FORK
•
SEAT & SEAT POST
•
BRAKES
•
TRANSMITION
•
BATTERY AND CHARGER
It is very important the brakes to work properly for one security and for
the others. The brakes system must be verified before any route and the
E-48 should not be used if a problem is detected.
See section: MECHANICS AND MAINTENACE to solve the above
mentioned problems.
7. ADVISES
•
Ride with care.
See section. SAFETY.
•
Use the right gear
•
Not to exceed of the limit weight. No passenger is allowed on the E-48.
•
Plan your route according to the autonomy of the vehicle.
•
A programmer by the charger plug is to help in the charger task.
•
Protect the E-48 against thieves. Use a lock for more security.
•
Do not get on the E-48 with the rest displayed, this item is designed only to
support the E-48 weight.
•
Keep the E-48 clean for a better performance of the vehicle.
