2. Assembly
Please read the
Safety advice
on
page 19
before installation and keep this user manual for
future reference.
The example given below shows a device in housing size 96x48mm.
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping screws by hand. Then
use a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
Seali
ng
48
,0
96,0
3,0
38,
0
Ins
tall
atio
n d
ept
h
inc
l. p
lug
-in
term
ina
l
Gap for
physical unit
2
2. Assembly