8
4. Function description and operation
4.1. Programming via configuration software PM-TOOL-MUSB4:
You receive the software on CD incl. an USB-cable with a device adapter. The connection is
done via a 4-pole micromatch connector plug on the back and the PC is connected via an USB
connector plug.
System requirements: PC with USB interface
Software: Windows XP, Windows Vista
With this tool the device configuration can be created, skipped and safed on the PC. Via the
easy to handle program surface the parameter can be changed, whereat the mode of operation
and the possible selection options can be preset via the program.
CAUTION!
During parameterisation with connected measuring signal, make sure that the
measuring signal has no mass supply to the programming plug. The programming adapter is
galvanic not isolated and directly connected with the PC. Via polarity of the input signal, a
current can discharge via the adapter and destroy the device as well as other connected
components!