H*38SVO-ST Outdoor Gas Fireplace
Page 12
XG0817 - 080311
Installation
Installing the Glass Beads
This fireplace is supplied with Designer Glass beads. Remove the
Door and trim as shown on page 10 and follow these instructions to
ensure all parts are removed or replaced as required.
Once the Trim and glass doors are removed place the glass beads
randomly across the pan surrounding the burners as shown in Figure 12.
NOTE:
DO NOT
Cover burners with beads or the optional rocks, as
shown in Figure 12.
Note: Ensure the rocks or beads do not cover the Burners.
Figure 29.
Installation of glass beads .
L42DF-ST
WARNING!
Do not attempt to clean glass when hot.
Do not clean glass with abrasive materials as any glass etching may
cause premature glass failure.
Do not operate this fireplace without the glass door, or with a broken
glass door.
