H*38SVO-ST Outdoor Gas Fireplace
Page 11
XG0817 - 080311
Installation
Figure 11b.
(Place Logs' "A" on Left & Right stands).
Installing the Logs and Embers
Bottom Logs
The
H38VO-ST
is supplied with eight (8) fibre logs. The two small bottom
logs (
"A"
)
are mounted on the burner grate by placing them diagonally
onto the supplied Log stands
.
The long Front / Back logs ("B") are
placed against the grate as shown in Figure 11c.
Note
: When placing
logs, arrange Logs "B" as not to cover Burner holes.
Top Logs
Next are the logs
"C"
which are placed diagonally, as shown in Figure
24d
.
The last Logs
"D"
are then mounted on top of logs
"A"
as shown
in Figure 11e.
WARNING: If logs are not placed properly, excessive sooting will result.
Figure 11d.
Log Installation. (Place Logs' "C" on-top of Logs "A".
Indentations on-top of Logs' "A"
Figure 11c.
(Place Logs' "B" as shown, in front of Right-hand "A", and
behind Left-hand "B".
Log A
Log B
Log C
Log A
Log B
Log C
Figure 11e.
Completed Installation.
Log D
Log D
Figure 11a.
(Empty firebox showing the Left & Right stands).
Front of Fireplace
Burners
Log Stand
Log Stand
Burner holes (front & back burner),
note hole pattern when placing logs
Air Inlets
Section 8: Installing the Accessories
