Montesa COTA 4RT 260 2023, Owner'S Manual

Page: 172 / 180

6-17 6-17
Electrical servicing
If there is no voltage, check the following:
y
Open circuit in the Black wire between the ignition
relay and the connector 9P (white) on the handlebar.
If there is voltage, check the continuity between the
terminals in each switch position, as shown in the table.
Disconnect the horn’s connectors.
Connect the 12 V battery to the horn’s terminals.
The horn is working properly when it makes a noise when
the 12 V battery is connected to its terminals.
Horn
Checks:
If the engine starts but the horn does not work, check the
following:
y
Loose connection.
Start the engine and check the voltage between the
following terminals of the connector 9P (white) on the
harness side:
Connection: Black (+) and Ground (–)
Standard: 12V approximately.
(1) HORN
(2) CONNECTORS
BATTERY
G
FREE
PUSH
COLOR LG
Ho GND
INTERRUPTOR DE LA BOCINA
BATERÍA BATERÍA
HORN SWITCH
2
1