Montesa COTA 4RT 260 2023, Owner'S Manual

Page: 131 / 180

5-6 5-6
Frame servicing
Install the stop ring into the slider groove securely.
Install the dust seal.
Install the centering plate and fork damper into the fork
tube.
(1) FORK DAMPER ASSEMBLY
(2) CENTERING PLATE
(3) FORK TUBE
(1) FORK SEAL DRIVER (1) FORK TUBE BUSHING (4) OIL SEAL
(2) GUIDE BUSHING (5) FORK SLIDER
(3) BACK-UP RING
Right Fork Assembly
Clean the parts thoroughly with non-flammable or high
flush point solvent before assembly.
Install the following to the fork tube:
– Fork tube bushing
– Guide bushing
– Back-up ring
Coat the guide and fork tube bushings with recommended
fork fluid.
Install the fork tube assembly into the fork slider.
(1) GUIDE BUSHING (4) STOP RING
(2) BUCK-UP RING (5) DUST SEAL
(3) OIL SEAL
Using the special tool, drive the guide bushing and backup
ring until the stop ring groove is fully stuck in the fork
slider base.
Install the oil seal (with the mark facing up) in the fork
slider. Drive the oil seal using the special tool, performing
a constant pressure until stops in back-up ring.
Tool:
Fork seal driver 07947–4630100
1
1
5
2
3
4
1
2
3
5
4
3
2
1