Montesa COTA 4RT 260 2023, Owner'S Manual

Page: 166 / 180

6-11 6-11
Electrical servicing
Fan motor relay inspection
Remove the fan motor relay.
Connect the ohmmeter to the fan motor relay connector
terminals.
Connection: Red – Blue
Connect the 12 V battery to the following fan motor relay
terminals.
Connection: Red – Black/Blue
There should be continuity only when the 12 V battery is
connected.
If there is no continuity when the 12 V battery is
connected, replace the fan motor relay.
(1) FAN MOTOR RELAY
Cooling fan system inspection
Fan motor inspection
Remove the fuel tank.
Disconnect the fan motor 2P (Natural) connector.
Directly connect the 12 V battery to the fan motor 2P
(Natural) connector terminals of the fan motor side.
The fan motor is correct when the fan motor operate
when the 12 V battery is connected.
If the fan motor does not operate, replace the fan motor
assembly.
(1) 2P (NATURAL) CONNECTOR
Engine stop switch inspection
Engine stop button inspection
Disconnect the engine stop button connectors.
Check the engine stop button for continuity.
There should be continuity only when the engine stop
button is pushed.
Replace the switch if it is out of specification.
(1) CONNECTORS
1
1
1