3. To charge the head, depress the foot pedal on the lower left side
of the bowl, and push the flush button. Release the flush button
after the bowl is moistened, and then pump the floor pedal 2-4
times to fill the bowl with water.
4. To flush, depress the foot pedal and push the flush button at the
same time – hold until all waste is removed.
Notice
To empty the bowl of excess water, operate flush button
until water level decreases to desired level.
MANUALLY OPERATED HEAD
1. Open the inlet water seacock below the cabin floor.
2. If overboard discharge is to be used, make sure the “Y” valve is
in the overboard position, and that the macerator discharge sea-
cock is open.
3. Pump the floor pedal 2-4 times to fill the bowl with water.
4. To flush, depress the foot pedal and operate flush handle next to
head at the same time. Operate handle until all waste is
removed.
Notice
To empty the bowl of excess water, operate flush button
until water level decreases to desired level.
SHIP SYSTEMS
11-16
Summary of Contents for 268 SC Sport Cruiser
