21
Section 3 -
Option Installation & Handling
3.1
Packaging Contents
The motion controller comes packed with Cryostation.
3.1.1
Unpacking the Motion Controller
1.
Locate the control unit boxes and remove the box wrap and cut the bands securing the box to
the pallet. Carefully lift the box off the pallet and set it on the floor or a nearby surface.
2.
Open the top of the box and remove the top piece of foam.
3.
Reach inside and grasp the underside of the unit. Lift the unit up and out of the box. Keeping
the unit in the same orientation, set onto an adjacent surface.
4.
Carefully remove the plastic wrap around the enclosure.
5.
Move the unit to the desired location.
» NOTE
The Nanopositioner is installed in the Cryostation system prior to shipping. Refer to the Cryostation
system manual for additional details.
