B
D
F
A
E
C
REMOVABLE LEVEL - Snaps off and sets on
the top edge of your frame to level your
pictures.
REMOVABLE PUSH PIN - Used to mark nail
holes through the HOOKS (see fig. E.) when
hanging pictures with wire hangers.
MAGNEKEYS - Remove and insert into the
notch of our SINGLE-NOTCH PRECISION
HANGERS, sawtooth or D-ring hangers to
perfectly mark your nail holes.
CENTER BUTTON - Telescopes and extends
the base of the unit for wire-hanging
pictures. Simply push the button and pull.
BUILT-IN HOOKS - Used to suspend wire
hanger pictures on the wall where desired.
Insert the PUSH PIN into the guide holes to
mark where your nails go.
SILICONE LATCH - Keeps the removable
hardware case, with 85 pieces of picture-
hanging hardware, attached to the unit.
GET TO KNOW GO HANG IT! PRO
A
B
C
D
E
F
© Aacraft, Inc. Georgetown, Texas. All rights reserved. Go Hang It!
is a trademark of Aacraft, Inc. Patent pending. MADE IN CHINA
12 Single-Notch Precision Hanger
24 Self-Tapping Screws
10 Picture Hooks (10 lb)
8 Picture Hooks (20 lb)
4 Picture Hooks (30 lb)
10 Nails 1.7x25
10 Nails 2.0x30
6 D-Hooks
8 FT Hanging Wire
(fits 10 lb Hooks)
HARDWARE ESSENTIALS INCLUDED