MONTAGUE M-E1, Owner'S Manual

Page: 41 / 69

41
1. Make sure your e-bike is in the
unfolded position with the frame
quick release Wedge properly seated
over the Lower Clamp (Fig. 40).
2. Open the quick release lever so the
lever is pointing upward. Tighten
the adjusting nut by turning it
clockwise by 1/4 turn (Fig. 45).
3. Close the lever. If there is too much
resistance for you to be able to
close the lever, open, and turn the
adjusting nut counter-clockwise 1/4
turn and try to close again (Fig. 45).
4. The quick release is securely closed
when it leaves an imprint on the
palm of your hand from moving
the lever into the closed position.
Make sure the word “close” is
visible and that the lever is pushed
fully to the closed position.
Unfolding the Pedals
If the pedals were folded down for a
more compact folded bike size, they
must be unfolded before riding
1. Pivot the pedal body 90 degrees, so
it is perpendicular to the crank arm.
(Fig. 46)
2. The pedal should should snap
into place and you should hear an
audible click. The inner spring loaded
portion of the pedal body should lock
into the spindle.
UNFOLDING YOUR MONTAGUE BICYCLE
CONTINUED
Great care should be taken when
locking the quick release levers on
your e-bike. If you do not fully under-
stand how to operate the quick release
levers, ask a bicycle dealer for assis-
tance, or call Montague’s Customer
Support Team at +1 617-491-7200.
DO NOT RIDE YOUR E-BIKE
WITHOUT ALL QUICK RELEASES
SECURELY LOCKED.
WARNING
Fig. 46: Pivot folding pedals to riding position