35
Your Montague e-bike is designed to
fold quickly without the use of tools.
To Fold Your Bike:
1. Lower the kickstand. Lift the rear
end of the bike to allow it to fully
straighten. Your bike should now
be held up by the kickstand and
balancing on its own (Fig. 28).
2. In order to fold the frame completely,
the crank arms must be positioned
properly. Grasp the pedal and turn
the crank arms counter-clockwise
until the non-drive side crank arm
is at its lowest point. It should be
perpendicular to the ground with the
pedal at the bottom (Fig. 29).
3. Open the frame quick release by
lifting up on the lever (fig 30).
4. Press straight down on the center of
the frame quick release. The skewer
should depress and will release
the quick release clamp on the
underside of the frame (Fig 31).
5. While holding the quick release
down, fold the bike in half (Fig. 32,
page 36).
FOLDING YOUR MONTAGUE BICYCLE
Fig. 28: Lowering the kickstand.
Fig. 30: Open the frame quick release.
Fig. 29: Reposition non-drive side crank arm
Fig. 31: Press down the frame quick release to al-
low the frame to fold.
Summary of Contents for M-E1
Page 64: ...64...
Page 66: ...66...
Page 68: ...68...
Page 69: ...69 From MONTAGUE CORPORATION P O Box 398032 Cambridge MA 02139...
