MENU SYSTEM
Use the four buttons under the LED display to set the mode in which the light will
operate. The buttons perform the following functions:
MENU/ESC:
Accesses the menu system or backs out of editing an entry.
UP:
Selects the next mode down in the Menu Map or increases the value of the
selected mode.
DOWN:
Selects the previous mode up in the Menu Map or decreases the value of
the selected mode.
ENTER:
Selects the currently displayed mode for editing or accepts the edited
value.
MENU DETAILS
For use as stand alone blacklight (including always on) without DMX turn to
page 8 to enter Strobe Mode
DMX Address Setup
Use this menu option to set the starting DMX address.
1. Press the
MENU
button to turn on the menu display.
2. Press the
UP
or
DOWN
button until
Addr
is displayed.
3. Press
ENTER
to select the entry for editing.
4. Use the
UP
and
DOWN
buttons to set the address
value.
DMX Channel Selection
Select the number of DMX channels to use. See the DMX Control section for details on
the two channel modes.
1. Press the
MENU
button to turn on the menu display.
2. Press the
UP
or
DOWN
button until
Chan
is displayed.
3. Press
ENTER
to select the entry for editing.
4. Use the
UP
and
DOWN
buttons to select the number
of DMX channels to use.
6
