NOTE: For use as a stand alone blacklight always on (without DMX)
set Brightness to P255 and Strobe to FS00
1. Press the
MENU
button to turn on the menu display.
2. Press the
UP
or
DOWN
buttons until
CoLo
is displayed.
3. Press
ENTER
repeatedly until
Pxxx
is
displayed (xxx can be any number).
4. Use the
UP
and
DOWN
buttons to set the
brightness level of the light.
5. Press
ENTER
until
SPxx
is displayed (xx
can be any number).
6. Use the
UP
and
DOWN
buttons to set the
speed of the strobing effect, from 0 (no
strobing) to 20 (20Hz).
Slave Mode
Only one fixture in each DMX chain can be the Master. All others must be set to Slave.
1. Press the
MENU
button to turn on the menu display.
2. Press the
UP
or
DOWN
buttons until
SLAu
is displayed.
3. Press
ENTER
to select Slave mode. The display will
read
SLa
.
MASTER/SLAVE MODE
Whenever the light is set to a mode other than a DMX address or Slave mode, it is
considered to be in Master mode. For example, when set to the Sound Activated
operation, it is in a Master mode.
When the light is the Master, it will send DMX instructions to other connected lights.
Those other lights must be set to Slave mode (SLAu) to receive and execute the
instructions sent by the Master light.
Note: Only one light in any DMX Universe can be the Master. All other lights in the chain
must be set to Slave mode (SLAu).
8
Strobe Mode
