DMX CONTROL
When the light is set to a DMX address it will respond to signals from a DMX controller.
The number and complexity of the signals it can respond to correspond directly to the
number of channels selected. The following tables show the functions and values for
each channel in the two channel modes (2 or 3).
2CH Mode
Channel
Value
Function
1
0-255
Dimmer 0-100%
2
0-11
No function
12-255
Strobe 0-20Hz
3CH Mode
Channel
Value
Function
1
0-9
No function
11-128
Auto mode
129-255
Sound activated mode
2
0-255
Sensitivity when in Sound mode, pulsing speed when in
Auto mode
3
0-11
No function
12-255
Strobing speed
DMX TERMINATION
As with all DMX devices, the last unit in any chain must have a DMX
terminator connected to the DMX output. If using just a single light,
connect a DMX terminator to the DMX output.
A DMX terminator is a DMX plug with a 120-ohm, 1/4-watt resistor
soldered between pins 2 and 3.
9
