43
•
Layer Start Position Y (mm): This option allows you to change the Y axis coordinates
of the position of the model layer.
Machine Tab
•
Right Nozzle Diameter (mm): Sets the diameter of the nozzle on the right extruder.
This printer only has a single extruder, which is designated the right extruder. The
nozzle diameter of this printer is 0.4mm.
Line Width Tab
•
Outer Wall Line Width (mm): This is the width of the outermost wall line. By
lowering this value, higher levels of detail can be printed.
•
Inner Wall(s) Line Width (mm): This is the width of a single wall line for all walls
except the outermost wall.
•
Top/Bottom Line Width (mm): This is the width of the top and bottom lines.
•
Infill Line Width (mm): This is the width of a single infill line.
•
Support Line Width (mm): This is the width of a single support structure line.
•
Skirt/Brim Line Width (mm): This is the width of a single skirt or brim line.
