23
9.
Ensure that the printer is powered off,
then insert the SD card with your saved
file into the SD card slot to the left of
the display on the front of the printer.
Power the printer on.
10.
Use the control knob to highlight and select the PRINT
option.
11.
Locate and select your file on the SD card. In the
accompanying images, the file is the Wanhao Robot,
but instead select the file you created in step 8 above.
12.
While it is printing the model, the printer will display a
progress bar, as well as a TUNE and a PAUSE option.
Selecting TUNE will allow you to make adjustments to
some of the settings or to abort the print operation.
13.
When the print operation is completed, the printer
will start to cool down. A progress bar will help you
predict the amount of time needed for cool down.
14.
Once the cool down process has finished, you can
remove the print from the build plate. The best way to
do so is with the included scraper.
