14
8.
The extruder will move to the center front of the build plate. Adjust the screw
under the center-front until you can move the paper with a slight bit of resistance.
Select the CONTINUE option to proceed.
9.
The extruder will move to the left-rear of the build plate. Adjust the screw under
the left-rear corner until you can move the paper with a slight bit of resistance.
Select the CONTINUE option to proceed.
10.
The extruder will move to the right-rear of the build plate. Adjust the screw under
the right-rear corner until you can move the paper with a slight bit of resistance.
Select the DONE option to finish the process.