10
15.
Turn the control post by hand until the flat side is
facing up.
16.
Position the control knob with the locking screw
facing up, then slide it onto the control post.
17.
Using the 1.5mm hex wrench, tighten the locking
screw to secure the control knob in place. Ensure that
there is a small amount of clearance between the
knob and the printer frame so the knob can be freely
moved.
18.
Manually turn the Z-axis screw clockwise to raise the
print bed.
19.
Insert the plastic spool holder nut into the hex shaped
indent inside the printer. Position the wrench mark on
the nut toward the 2 o'clock position.