13
4.
For step 1/7, use the control knob to raise the build plate, as directed. Press the
control knob to select the CONTINUE option when complete.
5.
For step 2/7, adjust the screw under the left-rear corner of the build plate until the
plate is 1mm from the nozzle. Turn the screw clockwise to lower the build plate and
counterclockwise to raise it. Select the CONTINUE option to proceed.
6.
For step 3/7, adjust the screw under the right-rear
corner of the build plate until the plate is 1mm from
the nozzle. Turn the screw clockwise to lower the
build plate and counterclockwise to raise it. Select the
CONTINUE option to proceed.
7.
Insert a sheet of ordinary printer paper between the
nozzle and the build plate, then readjust the screw
under the right-rear corner of the build plate until
there is a 1mm gap. Select the CONTINUE option to
proceed.
