22
49-2000696 Rev.0
OVEN LIGHT REPLACEMENT
1. Disconnect power at the main fuse or circuit breaker
panel.
2. Remove oven racks.
3. Remove the screws holding the steel frame.
NOTE:
The glass and gasket will be loose and can fall
when all of the screws are removed.
4. Remove the glass light cover, gasket, and steel frame..
5. Remove the bulb by firmly grasping and sliding the
bulb straight out until the two prongs have cleared the
ceramic holder.
6. Do not touch the glass of the new replacement bulb with
your fingers. It will cause the bulb to fail when it lights.
Grasp the replacement bulb with a clean towel or facial
tissue with the prongs facing down. Align the two prongs
in the ceramic holder, pressing gently until the bulb is
securely in the ceramic socket.
$OLJQWKHIUDPHJDVNHWDQGJODVVLQDKRUL]RQWDO
position and rotate them into place on the oven wall,
taking care not to pinch the silicone gasket seal.
8. Re-insert the screws that were previously removed.
9. Reconnect power.
CARE AND CLEANING
WARNING
SHOCK OR BURN HAZARD:
Before replacing oven light bulb, disconnect the electrical power to the
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
BURN HAZARD:
The glass cover and bulb should be removed when cool. Touching hot glass with
bare hands or a damp cloth can cause burns.
Summary of Contents for ZMB9031
