10
11
Step 3: Electrical Connections
The G-100+/200+ connects to your vehicle’s electrical system through the
color-coded wiring loom supplied with it. Connect this loom as shown.
Installation
RED
BLACK
WHITE (Aux. A)
BROWN (Aux. B)
Speed Sensor
Connector
GREEN
Installation
Connect to a 12 Volt power source that is
able to supply power even when the ignition
is turned off.
Use a common ground point for all parts of
the circuit. Do not use the vehicle’s chassis.
(Optional)
Attach up to two hand or foot
switches to use the Auxiliary Inputs. See
Page 12 for more details.
(Optional)
Wheel Sensor Connector Details:
BLUE - Signal
ORANGE - +5V
BLACK - 0V
(G-200+ only)
Connect to the output of your
vehicle’s fuel sender.
+12V
0V
Monit Speed
Sensor
