8
9
Step 1: Before You Start
Check that you have the items shown below. You will also need a selection of
tools, wiring equipment, and a suitable place to work.
(A) Rally Computer (B) Wiring Loom
(C) GPS Antenna and/or Wheel Speed Sensor (see page 4)
Installation
Step 2: Fitting to the Vehicle
Securely attach the rally computer to the interior of your vehicle. The most
common locations for this are either on the dashboard directly in front of the
co-driver or on the passenger door frame.
When fitting the device, ensure that:
It will not come free of its mounts during an accident. There are two
•
M4 bosses on the back that can be used to fasten it securely.
It does not interfere with any of the vehicle’s safety equipment.
•
The co-driver can operate it comfortably while seated.
•
Warning: If the vehicle still has airbags fitted, do not place the device over the
covers from which these are deployed. Doing so could result in serious injury in
the event of a collision.
Installation
(A)
(C)
(B)
