38
39
Advanced Features
Troubleshooting
Display Resolution
The distance counters normally have a resolution of ten metres. If you require
a higher level of accuracy this can be increased to one metre. To change this
select Settings > Advanced > Resolution.
Sleep Timer
The device will automatically enters a low power sleep mode after five minutes
of inactivity. This can be adjusted by selecting Settings > Advanced > Sleep.
Note: Take care to ensure your vehicle’s battery does not run flat if you disable
the Sleep Timer.
Restoring Factory Defaults
To restore all settings to their default factory values navigate to the About menu
and hold down the two buttons on the right of the screen for five seconds.
Warning: You will lose all calibration values when this is done.
If you’re having trouble getting fuel or distance measurements
working, read through this section for solutions to some common
problems. And if you can’t find an answer here, don’t hesitate to
contact Monit directly for help.
