Page 54 of 110
Rev. G
8.
Next, click the Add Group button in the center menu towards the left under
the device added previously. The following screen will appear.
9.
Name the group of parameters you will be adding in the Group Name. It is a
good practice to make the Group Name the same as the Array Tag Name to
prevent confusion.
10.
The Array Tag Name will be the name of the Array that you will have to enter
in the PLC. It must be exactly as you enter it in this box, including
capitalization, spelling, spaces, special characters, etc. It is a good practice to
make the Array Tag Name the same as the Group Name to prevent confusion.
11.
Choose the relevant data type. Make sure your PLC data type matches as well.
Summary of Contents for mCore SDR
Page 105: ...Page 105 of 110 Rev G...
