Page 26 of 110
Rev. G
2.
To enter a new rule, click the LAN rules tab in the center menu. Then click the Add
Rule button in the top right of the center menu. The following screen will appear.
3.
The Enable check box should be defaulted to checked, if not, check it. Enter a
name for the rule and then enter the Port number that you would like allowed an
incoming connection to.
4.
When done, click the Save Rule button in the bottom right.
5.
Repeat Steps 2 through 4 to add any additional rules required. Follow the same
steps for entering rules in the WAN tab as well.
1.
Once you are done entering all rules and ready for them to take effect, click
the Commit All Changes button in the left menu towards the bottom. A pop-up
box will appear. Click Ok to continue. mCore will then reboot with the rules
now taking effect.
Summary of Contents for mCore SDR
Page 105: ...Page 105 of 110 Rev G...
