User’s Guide
EMS 1.7R
24
*NOTE: While erasing the transmitter codes with function 32 the main unit code is also
being erased from the transceivers’ memory (if the transceivers are within the communication
range). This procedure takes about 8 second. After the erasing is completed the main unit code
will be rewritten down to memory of the transceiver, which was used in erasing procedure, to
reinstate the pager function. Two flashes of the indicator icon on the LCD screen will confirm
the main unit code is written down the transceiver memory.
If you do not want to wait the end of the procedure, exit the function (or programming) at
any time and repeat the Remote Code Learning as described above.
User Software Switches
SSW
Software Switch Function
Default
Button 1
Button 2
#
(LED ON)
(LED OFF)
11
Passive ARM Mode
OFF
ON
OFF
12
Lock with Passive Arm
OFF
ON
OFF
13
Auto Rearming
ON
ON
OFF
14
Ignition Safety Door Lock
ON
ON
OFF
15
Siren Chirp ON/OFF
ON
ON
OFF
22
2way Handset Alarming on Disarming
OFF
ON
OFF
23
All transceiver Page
OFF
ON
OFF
24
Passive Arming Immobiliser
OFF
ON
OFF
26
Door Operated Car Jacking Mode ON/OFF
OFF
ON
OFF
27
Prewarn sensor zone triggered indication on the transceiver
ON
ON
OFF
31
PIN Access 1
÷
9 (button 2 only) or
1
Press 19 times to set Press 19 times to set
11
÷
99 Digit Code (button 1 and button 2)
Tens Digit of
Units Digit
PIN Code
PIN Code
32*
Erase OTHER transmitter Codes (Save code of Remote Being Used)
On Together
33
Return User Software Switches to Default
On Together
34
Passive Immobiliser Disarm Button
Button1
Press both buttons (1 and 2) together to enter the setting.
Press both buttons once more to exit.
35
Passive Immobiliser Trigger Period
OFF
OFF
LED Indication:
15 seconds – LED single flashes
30 seconds – LED double flashes
60 seconds – LED threefold flashes
36
Entry Alarm Delay
OFF
OFF
LED Indication:
15 seconds – LED single flashes
30 seconds – LED double flashes
46
Move to Installer Switches
On Together
Cycle the ignition off/on after simultaneous pressing of buttons
1 and 2 to move to Installer Software Switches Settings.
Press buttons in one of the following
sequence: 1; 2; 3; 4; 1
⇒
1; 1
⇒
2; 1
⇒
3;
1
⇒
4; 2
⇒
1; 2
⇒
2; 2
⇒
3; 2
⇒
4; 3
⇒
1;
3
⇒
2; 3
⇒
3; 3
⇒
4; 4
⇒
1; 4
⇒
2; 4
⇒
3;
4
⇒
4 ;
Press Button
required number of
times:
1 time – in 15 s
2 times – in 30 s
3 times – in 60 s
Press Button
required number of
times:
1 time – for 15 s
2 times – for 30 s
Автомобильная охранная система “MONGOOSE” Модель EMS 1.7R
29
РУССКИЙ
Сработал датчик удара
Индикатор часов
Замки дверей заперты
Замки дверей открыты
Включен режим
энергосбережения
Двигатель заведен (Охрана с
заведенным двигателем)
Открыта дверь
Открыт капот
Открыт багажник
Разряжен элемент питания
Включено зажигание
Передача команды
Valet режим
Тестовый режим
Включена функция
блокировки кнопок пульта
Таймер парковки
Режим Anti Hijack
Режим охраны включен
Режим охраны выключен
Не используется
